Special valves
For special applications
- Special valves
Pneumatic Division Europe - Origa special valves provide a solution where our standard valve programm reaches its limits. Clever solutions, modified actuation or special housings: Pneumatic Division Europe - Origa will provide you with a valve for each application imaginable. Special valves can also be developed to your specifications.
|
|
Series S9 G-1/8, G-1/4 with NAMUR connections:
3/2, 5/2, 5/3 way valves with NAMUR connections.
Version to ATEX standard available.
Series S9 G-1/8, G-1/4: Valve for two hand operation:
2 hand operated valve for machines and equipment. The valve only switches from outlet port 4 to outlet port 2 if both signal inlets are simultaneously actuated or are actuated within 0.5 s. The valve cannot be switched again until both actuating signals are stopped. For protecting operating
personnel during manufacturing processes such as engraving, bending, stamping, burring etc.
Series S9 G-1/4: Oscillating valve
The oscillating valve generates oscillating movements such as e.g. shaking, hammering, plunging, feed motions etc. If compressed air is introduced into inlet port 1, the outlet ports 4 and 2 are alternately supplied with compressed air. The speed of the operated cylinder and also the stroke frequency are adjusted with two exhaust air throttles.
Series F G-1/4 Pedal actuated
3/2, 5/2 way valves for pedal actuation, with spring return of both positions indexed.
Series ARKV G-1/2 - G2:
2/2 way poppet valve, pneumatically actuated. For safely and reliably switching large volumes of air on and off.
